KNITTING FILLETS
Since the take over of all manufacturing equipment and all technical drawings of James Holdsworth UK we are able to over the complete range for Mayer, Terrot,
Orizio and Monarch – regardless if Ring or single rip or full face.
IMPRINT | DISCLAIMER | PRIVACY POLICY
© 2019 MEHLHORN GmbH
KNITTING FILLETS
DISTRIBUTION PARTNER
METAL INDUSTRY
AUTOMOTIVE INDUSTRY
PIPELINE INDUSTRY
USER TEST
SPECIAL INTEREST MAGAZINE BAUMETALL
READER TEST
How will metal surfaces with the new steel brush from Mehlhorn become bright and metallic in shortest time?
READER TEST RESULTS
100 readers can not be wrong. Read the outstanding test result of the new steel brush!
WORKING RULES
CONTROL BRUSH
The following working rules should be observed:
· Always wear Eye protection
· Never exceed maximum Speed of 3500/rpm
· If working with variable Speed tools such as Angle Grinder, ensure before start that machine is on low speed. Do not apply to much pressure when working with Control Brush, best results are achieved with little pressure
· If performance of CONTROL BRUSH goes down, simply change turning direction of CONTROL BRUSH and hold it with little pressure for about 2 seconds against a sharpening stone or normal sand paper.This procedure can be done about 10 times.
ADVANTAGES
CONTROL BRUSH
Advantages against common steel brushes or abrasive discs:
· Almost no warming of the surface
· No smearing or clogging up of the Control Brush
· Easily to resharpen, therefore long life time
· Ideal working with all Battery, Electrical powered or Pneumatic hand Drills
USER VIDEO
PRODUCT DESCRIPTION
CONTROL BRUSH
The newly developed steel CONTROL BRUSH (diameter 100mm) offers an effective method to:
· Take off rust, paint or coatings
· Clean surface's and welding seams
· Remove underbody protection or rubber seals
· To roughen up surface's
Not recommended for materials like wood, plastic or aluminium.
The new CONTROL BRUSH "PLUS" adapter gives you a 40 mm wide brush, to clean larger areas fast and effective.
PIGGING FILLETS
TRANSPORT FILLETS
ARTICLE NUMBER
20 237
20 238
20 245
DESCRIPTION
Transport fillets No. 22, tinned, 4-ply cotton with perbunan coating 38 mm width, total height 4,0 mm, 50 PPSI
Transport fillets No. 18, tinned, 4-ply cotton with perbunan coating 38 mm width, total height 4,0 mm, 85 PPSI
Transport fillet No. 22, tinned, 4-ply cloth with caoutchouc, 38 mm width, total height 7,5 mm, with knee, white backing
GRANULATE SCATTERING FILLETS
DESCRIPTION
Patented flexible brush fillets to brush, clean, scatter and transport:
- exceptional high cleaning ability
- very strong and stable nylon monofilaments
- no surface scratching (damaging)
- very good price/performance relation
- strong and flexible foundation, therefore easily useable for long rollers (5 - 6 m width)
- easy reclothing of the roll (in house possible) since only mounted with tension
- various bristle density available
- various bristle length available
- single U-shape bristles which can not fall out at even highest work loads
